Simplify the administration of SPECT and PET radiopharmaceuticals
and reduce your exposure!

In the new packaging solution from Trasis, the doses are delivered in sealed Cartridges, themselves being packed in Local Shields for injection. Depending whether the dose was produced in-house or supplied from a radiopharmacy, this Local Shield is inserted either in a lead pig for injection or in a shipping container.

 

To inject the dose, the technician simply snaps an Injection Tool on one end of the Local Shield and plugs a Luer Adaptor to the other end. The shielded dose is then ready for injection and can be connected to the injection set, as usual!

 

A dedicated Injection Set is available for the most efficient injection and rinsing, reducing the technician exposure.

 

Trasis Dose Dispenser

When produced in house, the dose is packed into a Local Shield that is itself inserted into an additional lead pig for injection.

 

The Injection Tool and a Sample Luer Adapter convert the shielded Cartridge into a syringe ready for injection.

Trasis Dose Dispenser

When supplied from a radiopharmacy, the dose is packed into a Local Shield itself inserted in a shipping container


 

The Injection Set allows injecting and rinsing the syringe and the line

 

How to inject when the dose is produced In-house

Dispenser DOWNLOAD VIDEO (.mpg file - 40MB)

 

The dose filled by the hospital, the dispenser is delivered in a 3 cm tungsten shield
 

Remove the bottom lid of the lead pig

Peel off the protective liner from the tip of the cartridge shield

Screw a Luer Adapter into the sterile tip of the Cartridge and (not illustrated) connect to the injection set that has been prepared for the patient
 

Remove the opposite lid of the lead pig

Snap on the Injection Tool

Proceed with the injection : the first stroke will inject the product into the line to the patient. Several strokes can be performed to rinse the cartridge and the lines, ensuring the complete transfer of the activity to the patient.
 

Pull the black ring to its extremity, in order to disconnect the plunger form the piston.

Press the two knobs of the Injection tool in order to disconnected it from the shield and thrown the cartridge in a decay container. The system is ready for the next injection.
 

  

The Injection Set protects the medical staff
and allows the complete transfer of the
activity to the patient.

How to inject when the dose is produced by a radiopharmacy

Dispenser DOWNLOAD VIDEO (.mov file - 10MB)

 

 

  • Open the lightweight shipping container,
  • Snap the Injection Tool on the Local Shield,
  • If necessary, assay the dose through the shield
  • Peel off the protective liner from the tip of the cartridge
  • Screw a Luer Adapter into the cap
  • Connect to the injection set that has been prepared for the patient
  • Proceed with the injection:
    • The first stroke will inject the product into the line to the patient.
    • The following strokes will rinse the cartridge and the lines, ensuring the complete transfer of the activity to the patient.

 

 

 

The Injection Set protects the medical staff and allows the complete transfer of the activity to the patient.